光传送网中结合传输损伤的路由和波长分配

在波长路由光网优化设计的过程中考虑了物理传输损伤造成的限制,提出了一种联合优化思路.将光信号在传输过程中的物理损伤作为问题公式的另一维约束,给出了相应的启发式算法,并按照由粗到细的机制对所提出的思路做了相应的评估,同时对负荷平衡问题作了初步的分析.数值结果表明这种算法可以获得与优化值相近的波长需求解,并且能够保证网络的传输性能,其业务分布随着备选路径的增加而趋向均衡.     

Preparation and microwave absorption properties of electroless Co-Ni-P coated strontium ferrite powder

A new type of Co-Ni-P coated strontium ferrite nanocomposite was prepared with electroless plating enhanced by ultrasonic wave at room temperature. The plating process was studied carefully. The morphology, crystal structure and microwave absorption properties of the Co-Ni-P coated powder were studied with field emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), energy dispersive analysis of X-rays (EDX) and vector network analyzer. The results show that the strontium ferrite powder was successfully coated with Co-Ni-P alloy and possesses excellent microwave absorption properties. The maximum microwave loss of the composite powder reaches −44.12 dB. The bandwidth with the loss above −10 dB exceeds 13.8 GHz.     

Influence of silicon on the microstructure and mechanical properties of Zr-Si-N composite films

A series of Zr-Si-N composite films with different Si contents were synthesized in an Ar and N₂ mixture atmosphere by the bi-target reactive magnetron sputtering method. These films’ composition, microstructure and mechanical properties were characterized by energy dispersive spectroscopy, X-ray diffraction, scanning electron microscopy, atomic force microscopy and nanoindentation. Experimental results revealed that after the addition of silicon, Si₃N₄ interfacial phase formed on the surface of ZrN grains and prevented them from growing up. Zr-Si-N composite films were strengthened at low Si content with the hardness and elastic modulus reaching their maximum values of 29.8 and 352 GPa at 6.2 at% Si, respectively. With a further increase of Si content, the crystalline Zr-Si-N films gradually transformed into amorphous, accompanied with a remarkable fall of films’ mechanical properties. This limited enhancement of mechanical properties in the Zr-Si-N films may be due to the low wettability of Si₃N₄ on the surface of ZrN grains.     

Bifurcations of Invariant Tori and Subharmonic Solutions of Singularly Perturbed System

This paper deals with bifurcations of subharmonic solutions and invariant tori generated from limit cycles in the fast dynamics for a nonautonomous singularly perturbed system. Based on Poincare map, a series of blow-up transformations and the theory of integral manifold, the conditions for the existence of invariant tori are obtained, and the saddle-node bifurcations of subharmonic solutions are studied.     

倒置结构锥形束计算机层析的精确成像与Grangeat算法实现

研究了一种新的圆加垂直单弧段的锥顶轨迹的锥形束计算机层析（CT）的完全性条件和精确重建的Grangeat方法，提出了倒置结构锥形束计算机层析的便于实现的圆加垂直多弧段的成像结构及进行精确重建的完全性条件。利用倒置成像结构与现有成像结构之间的等价关系，给出了倒置结构锥形束计算机层析的重建算法。最后，对上述几方面进行了计算机模拟。     

分辨率为1pm的波长监测新方法

在亚毫米尺度金属包覆波导研究基础上，提出了一种波长监测的新方法.实验采用自由空间耦合技术，激发了波导中对波长变化十分灵敏的超高阶导模，并以此为探针，实现了1pm波长漂移的监测. 关键词： 波长监测 金属包覆波导 超高阶导模     

基于内生信息的股票发售机制比较研究

本文在内生信息成本的基础上，通过引入投资银行的信息成本函数，考察了国际上主要股票发售机制的内在机理，并用一个统一的框架比较了各种发售机制的差异及演进趋势。本研究表明，在投资银行和投资者信息成本相同的情况下，由于固定价格发售机制须用额外的折价去解决投资者之间的信息问题，因而相对于累计投标询价制是一种处于劣势的机制选择。同时指出，具有信息成本优势的机构投资者的出现和发展，是固定价格发行向询价发行过渡的一个必要条件。     

Preparation and characterization of carbon xerogel (CX) and CX–SiO composite as anode material for lithium-ion battery

Carbon xerogel (CX), a kind of novel carbon material with low-density and continuous nano-porous structure that can be controlled and tailored on nanometer scale, has been prepared through the sol–gel polycondensation of resorcinol (R) with formaldehyde (F) followed by drying at ambient pressure and carbonization in inert atmosphere, and CX–SiO composite has been synthesized by high energy mechanical ball-milling of the obtained CX and commercial SiO at room temperature and atmosphere. The characteristics of CX and CX–SiO as anode material for lithium-ion battery have been systematically investigated on basis of field emission scanning electron microscope (FESEM), X-ray diffraction (XRD), electrochemical and charge–discharge tests. The results showed that, CX–SiO is composed of active carbon, graphite, SiO and dispersed Si crystal while CX consists of active carbon and graphite, CX–SiO has smaller and much more uniform particles than CX. SiO can greatly improve discharge capacity of CX with an acceptable sacrifice of cycling stability, and the charge–discharge capacity of CX–SiO comes mainly from lithium insertion–extraction in Si–SiO in the sample.     

Some sufficient conditions for oscillation of impulsive delay hyperbolic systems with Robin boundary conditions

This paper deals with the oscillation problems of delay hyperbolic systems with impulses. Some sufficient conditions for oscillations of impulsive delay hyperbolic systems with Robin boundary conditions are obtained and the criteria of oscillation of the systems are established.     

An approach based on simplified KLT and wavelet transform for enhancing speech degraded by non-stationary wideband noise

It is well known that the non-stationary wideband noise is the most difficult to be removed in speech enhancement. In this paper a novel speech enhancement algorithm based on the dyadic wavelet transform and the simplified Karhunen-Loeve transform (KLT) is proposed to suppress the non-stationary wideband noise. The noisy speech is decomposed into components by the wavelet space and KLT-based vector space, and the components are processed and reconstructed, respectively, by distinguishing between voiced speech and unvoiced speech. There are no requirements of noise whitening and SNR pre-calculating. In order to evaluate the performance of this algorithm in more detail, a three-dimensional spectral distortion measure is introduced. Experiments and comparison between different speech enhancement systems by means of the distortion measure show that the proposed method has no drawbacks existing in the previous methods and performs better shaping and suppressing of the non-stationary wideband noise for speech enhancement.